post

HONEYWELL HOWARD LEIGHT 1030943 Industrial Ear Muffs, 30dB, Over-the-Head 52ZV60

HONEYWELL HOWARD LEIGHT 1030943 Industrial Ear Muffs, 30dB, Over-the-Head 52ZV60
HONEYWELL HOWARD LEIGHT 1030943 Industrial Ear Muffs, 30dB, Over-the-Head 52ZV60

HONEYWELL HOWARD LEIGHT 1030943 Industrial Ear Muffs, 30dB, Over-the-Head 52ZV60
Industrial Ear Muffs, 30dB, Over-the-Head 52ZV60. Ear muffs fit over the ears to protect against potentially harmful sound levels that can cause hearing loss. These safety ear muffs consist of a headband with padded ear cups that seal around the ears to provide hearing protection by dampening surrounding noise. They’re also more visible than ear plugs for confirming that workers are complying with hearing safety rules. Protective ear muffs are ideal for environments with intermittent noise because they can rest around your neck when they’re not in use and don’t require rolling to reequip. Pair them with ear plugs to improve the NRR by 5 decibels (dB). Impulse noise protection ear muffs (also called electronic ear muffs) electronically filter out constant, loud noise and short bursts of high-volume noise. These electronic hearing protection ear muffs reduce, or attenuate, loud noises while still allowing you to hear ambient sound. Electronic ear protection is often worn to protect against impulse (or impact) noises such as gunfire or metal stamping, pressing, and forging sounds. Grainger Part #:52ZV60. Add to Favorite Sellers. Sign up to Newsletter. View more great items. STARRETT 99124-10 Band Saw Blade, 10 ft. Blade L, 10/14 TPI 54GG55. HUSQVARNA DRI8-VAC-6 Diamond-Tipped Core Bit, 6in 483U61. KISHIGO 1824-S High-Visibility Vest, Black/Lime, Women, S 812EU5. REDHAT K3A432V Fuel Gas Solenoid Valve, 3/8 Pipe Sz 54ZE11. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules.
HONEYWELL HOWARD LEIGHT 1030943 Industrial Ear Muffs, 30dB, Over-the-Head 52ZV60
post

HONEYWELL HOWARD LEIGHT 1030390 Electronic Ear Muff, 25dB, Over-the-Head 36G710

HONEYWELL HOWARD LEIGHT 1030390 Electronic Ear Muff, 25dB, Over-the-Head 36G710
HONEYWELL HOWARD LEIGHT 1030390 Electronic Ear Muff, 25dB, Over-the-Head 36G710

HONEYWELL HOWARD LEIGHT 1030390 Electronic Ear Muff, 25dB, Over-the-Head 36G710
Electronic Ear Muff, 25dB, Over-the-Head 36G710. Communication headsets and earpieces combine hearing protection with the ability to connect to a radio network for hands-free communication between compatible devices. They also prevent those nearby from overhearing incoming communications to maintain privacy and avoid distraction. Listen-only devices allow the user to receive voice and audio messages while two-way devices allow the user to give and receive messages. These headsets and earpieces are ideal for maintaining communication between different areas of a workplace and coordinating teamwork at construction sites, emergency scenes, refineries, airports, and other loud settings. Listen-only headsets connect to an external radio, walkie-talkie, or personal audio device to give users the ability to receive messages or listen to music or other audio. When used with a walkie-talkie, they also allow users to transmit messages. They have ear muffs that fit over the ears to insulate against outside noise and a cord for plugging into a compatible device. They’re also more visible than ear plugs for confirming that workers are complying with hearing safety rules. Grainger Part #:36G710. Add to Favorite Sellers. Sign up to Newsletter. View more great items. AMERICAN GARAGE DOOR SUPPLY ARBZS-1824 Adj Bracket Operator Reinforcement 36R933. NIBCO 7035 3/4 Drop Adapter, Cast BRZ, 3/4 Tube, CxFNPT 36N490. TRITAN 35BS11H X 3/4 Sprocket, 3/8in, 3/4in, Single 36GA19. TRITAN 40BS14H X 1 Sprocket, 1/2in, 1in, Single 36GA75. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules.
HONEYWELL HOWARD LEIGHT 1030390 Electronic Ear Muff, 25dB, Over-the-Head 36G710
post

HONEYWELL HOWARD LEIGHT 1030390 Electronic Ear Muff, 25dB, Over-the-Head

HONEYWELL HOWARD LEIGHT 1030390 Electronic Ear Muff, 25dB, Over-the-Head
HONEYWELL HOWARD LEIGHT 1030390 Electronic Ear Muff, 25dB, Over-the-Head

HONEYWELL HOWARD LEIGHT 1030390 Electronic Ear Muff, 25dB, Over-the-Head
Electronic Ear Muff, 25dB, Over-the-Head. Communication headsets and earpieces combine hearing protection with the ability to connect to a radio network for hands-free communication between compatible devices. They also prevent those nearby from overhearing incoming communications to maintain privacy and avoid distraction. Listen-only devices allow the user to receive voice and audio messages while two-way devices allow the user to give and receive messages. These headsets and earpieces are ideal for maintaining communication between different areas of a workplace and coordinating teamwork at construction sites, emergency scenes, refineries, airports, and other loud settings. Listen-only headsets connect to an external radio, walkie-talkie, or personal audio device to give users the ability to receive messages or listen to music or other audio. When used with a walkie-talkie, they also allow users to transmit messages. They have ear muffs that fit over the ears to insulate against outside noise and a cord for plugging into a compatible device. They’re also more visible than ear plugs for confirming that workers are complying with hearing safety rules. Grainger Part #:36G710. Add to Favorite Sellers. Sign up to Newsletter. View more great items. PARKER 62PTC-8 Union, 1/2 In. TYGON AAB00018 Tubing, 1/4 I. NVENT CADDY SCH12B Strut Clamp, Steel. ECONOLINE 414414 Motor Assembly. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules.
HONEYWELL HOWARD LEIGHT 1030390 Electronic Ear Muff, 25dB, Over-the-Head
post

HONEYWELL HOWARD LEIGHT 1030943 Industrial Ear Muffs, 30dB, Over-the-Head

HONEYWELL HOWARD LEIGHT 1030943 Industrial Ear Muffs, 30dB, Over-the-Head
HONEYWELL HOWARD LEIGHT 1030943 Industrial Ear Muffs, 30dB, Over-the-Head

HONEYWELL HOWARD LEIGHT 1030943 Industrial Ear Muffs, 30dB, Over-the-Head
Industrial Ear Muffs, 30dB, Over-the-Head. Ear muffs fit over the ears to protect against potentially harmful sound levels that can cause hearing loss. These safety ear muffs consist of a headband with padded ear cups that seal around the ears to provide hearing protection by dampening surrounding noise. They’re also more visible than ear plugs for confirming that workers are complying with hearing safety rules. Protective ear muffs are ideal for environments with intermittent noise because they can rest around your neck when they’re not in use and don’t require rolling to reequip. Pair them with ear plugs to improve the NRR by 5 decibels (dB). Impulse noise protection ear muffs (also called electronic ear muffs) electronically filter out constant, loud noise and short bursts of high-volume noise. These electronic hearing protection ear muffs reduce, or attenuate, loud noises while still allowing you to hear ambient sound. Electronic ear protection is often worn to protect against impulse (or impact) noises such as gunfire or metal stamping, pressing, and forging sounds. Grainger Part #:52ZV60. Add to Favorite Sellers. Sign up to Newsletter. View more great items. HONEYWELL FIBRE-METAL P2ARW15A000 Hard Hat, Type 1, Class G, Red PK 4. DAYTON 1ANV2 Semi Pneumatic Wheel, Rubber, For 5Z082. ALBION 16DT05201R Caster, 1200 lb, 5 in Dia. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules.
HONEYWELL HOWARD LEIGHT 1030943 Industrial Ear Muffs, 30dB, Over-the-Head
post

Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02

Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02

Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
This Impact Sport Bluetooth Electronic Shooting Earmuff offers superior hearing protection for shooting while keeping you safely connected to environmental sounds. Digital sound compression provides a lightning-fast 0.5 millisecond reaction time (the interval between when a shot is fired and when the earmuff lowers the sound to a safe level). Two high-gain omni-directional microphones deliver 5X sound amplification of low level frequencies. This allows you to hear important commands on the range, and crucial environment sounds when hunting. Integrated Bluetooth technology allows the electronic earmuff to sync with your mobile device for seamless music streaming. The 2 Mbps data speed is twice as fast as Bluetooth 4.2 for higher fidelity audio from your music player. Low profile ear cups ensure proper firearm stock clearance while aiming, and the padded headband is adjustable for a comfortable, customized fit. The rechargeable lithium ion battery delivers long-lasting performance. All electronic shooting earmuffs and safety eyewear are compatible for use with each other. 0.5 MILLISECOND REACTION TIME: Extremely fast.
Honeywell Ademco Impact Sport Bluetooth 5.0 Electronic Shooting Earmuff R-02
post

Honeywell Howard Leight Sync Electo Earmuffs

Honeywell Howard Leight Sync Electo Earmuffs

Honeywell Howard Leight Sync Electo Earmuffs
Enhance your situational awareness with these safety earmuffs that combine FM radio with advanced sound amplification capability. These Howard Leight Sync Electo Digital Radio Earmuffs feature separate radio and sound amplification knobs. Ambient Sound up to 82dB is Enhanced: Stereo microphones amplify and enhance ambient sound up to 82dB, so you can hear alarms, voices, and other important communication more effectively. Ambient Sound over 82dB is Reduced: For ambient noise exposure over 82dB, passive hearing protection is used to reduce exposure to hazardous noise. LCD Display: LDC display with auto-search radio function makes finding stations easy. Easily Customizable: Allows 10 pre-set stations and volume memory. Use Your Own Music Device: Includes 3.5mm auxiliary input cable for your personal music device.
Honeywell Howard Leight Sync Electo Earmuffs
post

HONEYWELL HOWARD LEIGHT 1030331 Electronic Ear Muff, 25dB, Over-the-Head

HONEYWELL HOWARD LEIGHT 1030331 Electronic Ear Muff, 25dB, Over-the-Head
HONEYWELL HOWARD LEIGHT 1030331 Electronic Ear Muff, 25dB, Over-the-Head

HONEYWELL HOWARD LEIGHT 1030331 Electronic Ear Muff, 25dB, Over-the-Head
Electronic Ear Muff, 25dB, Over-the-Head. Communication headsets and earpieces combine hearing protection with the ability to connect to a radio network for hands-free communication between compatible devices. They also prevent those nearby from overhearing incoming communications to maintain privacy and avoid distraction. Listen-only devices allow the user to receive voice and audio messages while two-way devices allow the user to give and receive messages. These headsets and earpieces are ideal for maintaining communication between different areas of a workplace and coordinating teamwork at construction sites, emergency scenes, refineries, airports, and other loud settings. Listen-only headsets connect to an external radio, walkie-talkie, or personal audio device to give users the ability to receive messages or listen to music or other audio. When used with a walkie-talkie, they also allow users to transmit messages. They have ear muffs that fit over the ears to insulate against outside noise and a cord for plugging into a compatible device. They’re also more visible than ear plugs for confirming that workers are complying with hearing safety rules. Grainger Part #:36G709. Add to Favorite Sellers. Sign up to Newsletter. View more great items. MONOPRICE 3733 Port Saver, M HDMI to F HDMI, 90 Deg. NTN UCFUX-1.1/4M 4 Bolt Flng Brg, Radial Ball, 1 1/4in Bore. GRAINGER APPROVED 19N783 GGS Copper Alloy Electrode Holder. DAYTON 4JMV6 Pump, 3/4 HP, 230/460V, 3.0/1.5 Amp. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules.
HONEYWELL HOWARD LEIGHT 1030331 Electronic Ear Muff, 25dB, Over-the-Head
post

By Honeywell Impact Pro Sound Amplification Electronic Earmuff (R-01902) with

By Honeywell Impact Pro Sound Amplification Electronic Earmuff (R-01902) with
By Honeywell Impact Pro Sound Amplification Electronic Earmuff (R-01902) with
By Honeywell Impact Pro Sound Amplification Electronic Earmuff (R-01902) with
By Honeywell Impact Pro Sound Amplification Electronic Earmuff (R-01902) with
By Honeywell Impact Pro Sound Amplification Electronic Earmuff (R-01902) with

By Honeywell Impact Pro Sound Amplification Electronic Earmuff (R-01902) with
Bundle includes by Honeywell Impact Pro Sound Amplification Electronic Earmuff (R-01902) and Genesis Sharp-Shooter Safety Eyewear, Clear Lens (R-03570) Built-in directional microphones amplify range commands and other ambient sounds to a safe 82 dB, providing more natural listening and enhanced communication Actively listens and automatically shuts off amplification when ambient sound reaches 82 dB; passively blocks out noise at 30dB Includes 2 AAA batteries and a 3.5mm connection cord for MP3 players and scanners; automatic shut-off feature after 4 hours increases battery life 9-base wraparound uni-lens style offers maximum protective coverage and superior peripheral vision; soft, elastomer browguard diffuses impact while providing comfort at all key points.
By Honeywell Impact Pro Sound Amplification Electronic Earmuff (R-01902) with
post

Honeywell Howard Leight 1030333 Over-The-Head Electronic Ear Muffs, 25 Db, Sync

Honeywell Howard Leight 1030333 Over-The-Head Electronic Ear Muffs, 25 Db, Sync

Honeywell Howard Leight 1030333 Over-The-Head Electronic Ear Muffs, 25 Db, Sync
Gloves & Safety Apparel. Auto & Truck Maintenance. Machining, Bearings & V-Belts. HONEYWELL HOWARD LEIGHT 1030333 Over-the-Head Electronic Ear Muffs, 25 dB, Sync. View more great items. Oz Lifting Products Ozgal. 19-90 Cable Assembly, Galvanized, 3/16 X 90 Ft. Flotec Fp5732 Pump Booster, 1Ph 10Gpm 115/230V, 1Hp. Gast 2Am-Ncw-7A Stock 30/Skid 2Am-Ncw-7A Air Motor. Conrader Rct1-F1-Hu Unloader Pilot Valve, 1/4 (M)Npt, 68. Other Business & Industrial. Electrical Boxes and Enclosures. Light Industrial Equipment & Tools. Electrical Outlets & Recepticles. Add to Favourite Sellers. Sign up to Newsletter. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
Honeywell Howard Leight 1030333 Over-The-Head Electronic Ear Muffs, 25 Db, Sync